Add LionBit Dev Board. (espressif#6151)

* Add LionBit Dev Board. * Create lionbit in variants.

Author: niwantha33

boards.txt

@@ -10953,4 +10953,149 @@ sonoff_dualr3.menu.DebugLevel.debug.build.code_debug=4
 sonoff_dualr3.menu.DebugLevel.verbose=Verbose
 sonoff_dualr3.menu.DebugLevel.verbose.build.code_debug=5
 
-##############################################################
+##############################################################
+lionbit.name=Lion:Bit Dev Board
+
+lionbit.upload.tool=esptool_py
+lionbit.upload.maximum_size=1310720
+lionbit.upload.maximum_data_size=327680
+lionbit.upload.flags=
+lionbit.upload.extra_flags=
+
+lionbit.serial.disableDTR=true
+lionbit.serial.disableRTS=true
+
+lionbit.build.tarch=xtensa
+lionbit.build.bootloader_addr=0x1000
+lionbit.build.target=esp32
+lionbit.build.mcu=esp32
+lionbit.build.core=esp32
+lionbit.build.variant=lionbit
+lionbit.build.board=Lion:Bit_Dev_Board
+
+lionbit.build.f_cpu=240000000L
+lionbit.build.flash_size=4MB
+lionbit.build.flash_freq=80m
+lionbit.build.flash_mode=dio
+lionbit.build.boot=dio
+lionbit.build.partitions=default
+lionbit.build.defines=
+lionbit.build.loop_core=
+lionbit.build.event_core=
+
+
+lionbit.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
+lionbit.menu.PartitionScheme.default.build.partitions=default
+lionbit.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
+lionbit.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
+lionbit.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
+lionbit.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
+lionbit.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
+lionbit.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
+lionbit.menu.PartitionScheme.minimal.build.partitions=minimal
+lionbit.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
+lionbit.menu.PartitionScheme.no_ota.build.partitions=no_ota
+lionbit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
+lionbit.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
+lionbit.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
+lionbit.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
+lionbit.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
+lionbit.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
+lionbit.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
+lionbit.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
+lionbit.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
+lionbit.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
+lionbit.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
+lionbit.menu.PartitionScheme.huge_app.build.partitions=huge_app
+lionbit.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
+lionbit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
+lionbit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
+lionbit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
+lionbit.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
+lionbit.menu.PartitionScheme.fatflash.build.partitions=ffat
+lionbit.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
+lionbit.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
+lionbit.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
+lionbit.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
+lionbit.menu.PartitionScheme.rainmaker=RainMaker
+lionbit.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
+lionbit.menu.PartitionScheme.rainmaker.upload.maximum_size=3145728
+
+lionbit.menu.CPUFreq.240=240MHz (WiFi/BT)
+lionbit.menu.CPUFreq.240.build.f_cpu=240000000L
+lionbit.menu.CPUFreq.160=160MHz (WiFi/BT)
+lionbit.menu.CPUFreq.160.build.f_cpu=160000000L
+lionbit.menu.CPUFreq.80=80MHz (WiFi/BT)
+lionbit.menu.CPUFreq.80.build.f_cpu=80000000L
+lionbit.menu.CPUFreq.40=40MHz (40MHz XTAL)
+lionbit.menu.CPUFreq.40.build.f_cpu=40000000L
+lionbit.menu.CPUFreq.26=26MHz (26MHz XTAL)
+lionbit.menu.CPUFreq.26.build.f_cpu=26000000L
+lionbit.menu.CPUFreq.20=20MHz (40MHz XTAL)
+lionbit.menu.CPUFreq.20.build.f_cpu=20000000L
+lionbit.menu.CPUFreq.13=13MHz (26MHz XTAL)
+lionbit.menu.CPUFreq.13.build.f_cpu=13000000L
+lionbit.menu.CPUFreq.10=10MHz (40MHz XTAL)
+lionbit.menu.CPUFreq.10.build.f_cpu=10000000L
+
+
+lionbit.menu.FlashMode.dio=DIO
+lionbit.menu.FlashMode.dio.build.flash_mode=dio
+lionbit.menu.FlashMode.dio.build.boot=dio
+lionbit.menu.FlashMode.qio=QIO
+lionbit.menu.FlashMode.qio.build.flash_mode=dio
+lionbit.menu.FlashMode.qio.build.boot=qio
+lionbit.menu.FlashMode.qout=QOUT
+lionbit.menu.FlashMode.qout.build.flash_mode=dout
+lionbit.menu.FlashMode.qout.build.boot=qout
+lionbit.menu.FlashMode.dout=DOUT
+lionbit.menu.FlashMode.dout.build.flash_mode=dout
+lionbit.menu.FlashMode.dout.build.boot=dout
+
+lionbit.menu.FlashFreq.80=80MHz
+lionbit.menu.FlashFreq.80.build.flash_freq=80m
+lionbit.menu.FlashFreq.40=40MHz
+lionbit.menu.FlashFreq.40.build.flash_freq=40m
+
+lionbit.menu.FlashSize.4M=4MB (32Mb)
+lionbit.menu.FlashSize.4M.build.flash_size=4MB
+lionbit.menu.FlashSize.4M.build.partitions=default
+
+
+
+lionbit.menu.UploadSpeed.115200=115200
+lionbit.menu.UploadSpeed.115200.upload.speed=115200
+lionbit.menu.UploadSpeed.256000.windows=256000
+lionbit.menu.UploadSpeed.256000.upload.speed=256000
+lionbit.menu.UploadSpeed.230400.windows.upload.speed=256000
+lionbit.menu.UploadSpeed.230400=230400
+lionbit.menu.UploadSpeed.230400.upload.speed=230400
+lionbit.menu.UploadSpeed.460800.linux=460800
+lionbit.menu.UploadSpeed.460800.macosx=460800
+lionbit.menu.UploadSpeed.460800.upload.speed=460800
+
+
+lionbit.menu.LoopCore.1=Core 1
+lionbit.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
+lionbit.menu.LoopCore.0=Core 0
+lionbit.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
+
+lionbit.menu.EventsCore.1=Core 1
+lionbit.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
+lionbit.menu.EventsCore.0=Core 0
+lionbit.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
+
+lionbit.menu.DebugLevel.none=None
+lionbit.menu.DebugLevel.none.build.code_debug=0
+lionbit.menu.DebugLevel.error=Error
+lionbit.menu.DebugLevel.error.build.code_debug=1
+lionbit.menu.DebugLevel.warn=Warn
+lionbit.menu.DebugLevel.warn.build.code_debug=2
+lionbit.menu.DebugLevel.info=Info
+lionbit.menu.DebugLevel.info.build.code_debug=3
+lionbit.menu.DebugLevel.debug=Debug
+lionbit.menu.DebugLevel.debug.build.code_debug=4
+lionbit.menu.DebugLevel.verbose=Verbose
+lionbit.menu.DebugLevel.verbose.build.code_debug=5
+
+##############################################################

variants/lionbit/pins_arduino.h

@@ -0,0 +1,92 @@
+#ifndefPins_Arduino_h
+#definePins_Arduino_h
+
+#include<stdint.h>
+
+#defineEXTERNAL_NUM_INTERRUPTS 16
+#defineNUM_DIGITAL_PINS 40
+#defineNUM_ANALOG_INPUTS 16
+
+#defineanalogInputToDigitalPin(p) (((p) < 20) ? (esp32_adc2gpio[(p)]) : -1)
+#definedigitalPinToInterrupt(p) (((p) < 40) ? (p) : -1)
+#definedigitalPinHasPWM(p) (p < 34)
+
+staticconstuint8_tLED_BUILTIN=0; // GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1,EMAC_TX_CLK
+staticconstuint8_tSWITCH_A=2; // GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0,SD_DATA0
+staticconstuint8_tSWITCH_B=4; // GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1,SD_DATA1, EMAC_TX_ER
+
+staticconstuint8_tTX=1;
+staticconstuint8_tRX=3;
+
+/* LionBit pin setup */
+staticconstuint8_tD0=3; //Rx GPIO3, U0RXD, CLK_OUT2
+staticconstuint8_tD1=1; //TX GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
+//-------------------------------------------------------------------
+
+//Please do not use while using QIO SPI mode ; Use only DIO flash mode
+staticconstuint8_tD2=9; //I/O U1RX GPIO9, SD_DATA2, SPIHD, HS1_DATA2, U1RXD
+staticconstuint8_tD3=10; //I/O U1TX GPIO10, SD_DATA3, SPIWP, HS1_DATA3, U1TXD
+//-------------------------------------------------------------------
+staticconstuint8_tU1RX=9; //I/O U1RX
+staticconstuint8_tU1TX=10; //I/O U1TX
+
+//Second Segment - Sector -01 (Voltage (*5v or 3.3V) can be selected by using D4-7 Jumper
+staticconstuint8_tD4=16; //I/O U2RX GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
+staticconstuint8_tD5=17; //I/O U2TX GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
+staticconstuint8_tD6=21; //I/O SDA GPIO21, VSPIHD, EMAC_TX_EN
+staticconstuint8_tD7=22; //I/O SCl GPIO22, VSPIWP, U0RTS, EMAC_TXD1
+
+//Second Segment - Sector -02 (Voltage (*5v or 3.3V) can be selected by using D8-11 Jumper
+staticconstuint8_tD8=5; //I/O GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
+staticconstuint8_tD9=23; //I/O GPIO23, VSPID, HS1_STROBE **********************************************Don not use when display "ON or USE"*************************
+staticconstuint8_tD10=19; //I/O GPIO19, VSPIQ, U0CTS, EMAC_TXD0
+staticconstuint8_tD11=18; //I/O GPIO18, VSPICLK, HS1_DATA7 **********************************************Don not use when display "ON or USE"*************************
+
+
+// Analog to Digital Converter (Support 5V) ADC2 pins not recommended while using Wifi
+staticconstuint8_tA0/*ADC2_CH3 */=12; //MAX 5V,I/O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2,SD_DATA2, EMAC_TXD3
+staticconstuint8_tA1/*ADC1_CH0 */=14; //MAX 5V,I/O GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK,SD_CLK, EMAC_TXD2
+staticconstuint8_tA2/*ADC2_CH6 */=34; //MAX 5V,GPIO34, ADC1_CH6, RTC_GPIO4 ***********************/////////////////////Connected LDR/////////////////////////////
+staticconstuint8_tA3/*ADC1_CH7 */=35; //MAX 5V,GPIO35, ADC1_CH7, RTC_GPIO5
+staticconstuint8_tA4/*ADC2_CH5 */=15; //MAX 5V,GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD,SD_CMD, EMAC_RXD3
+staticconstuint8_tA5/*ADC2_CH4 */=13; //MAX 5V,GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3,SD_DATA3, EMAC_RX_ER
+//-------------------------------------------------------------------
+
+//------------------Touch Sensors-------------------------------------------------
+staticconstuint8_tVP=36; // GPIO36, ADC1_CH0, RTC_GPIO0
+staticconstuint8_tVN=39; // GPIO39, ADC1_CH3, RTC_GPIO3
+
+staticconstuint8_tT0=36;
+staticconstuint8_tT1=39;
+
+staticconstuint8_tDAC1=25; // I/O GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
+staticconstuint8_tDAC2=26; // I/O GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
+
+staticconstuint8_tSDA=21;
+staticconstuint8_tSCL=22;
+
+/* Hardware HSPI */
+staticconstuint8_tMOSI=13; // 13;
+staticconstuint8_tMISO=12; // 12;
+staticconstuint8_tSCK=14; // 14;
+staticconstuint8_tSS=15; // 15;
+
+/* Software VSPI [Note : D9 and D11 Do not use when display "ON or USE"]*/
+staticconstuint8_tVMOSI=23; //23 /*Do not use when display "ON or USE"*/
+staticconstuint8_tVMISO=19; // 19
+staticconstuint8_tVSCK=18; // 18 /*Do not use when display "ON or USE"*/
+staticconstuint8_tVSS=5; // 5
+
+// Inbuilt Display Unit 128*128 ST7735 Driver
+staticconstuint8_tRST=33; // - RESET GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output),ADC1_CH5, TOUCH8, RTC_GPIO8
+staticconstuint8_tCLK=18; // - (18) CLK (D11) and D9 pin will engaged when display "ON or USE"
+staticconstuint8_tCS=27; // - CS GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
+staticconstuint8_tDC=32; //- DC/A0 GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4,TOUCH9, RTC_GPIO9
+staticconstuint8_tST_MOSI=23; // - MOSI (D9) This D9 pin will engaged when display "ON or USE"
+
+staticconstuint8_tMTDO=15; // A4 JTAG SIGNAL -> TDO
+staticconstuint8_tMTDI=12; // A0 JTAG SIGNAL -> TDI
+staticconstuint8_tMTCK=13; // A5 JTAG SIGNAL -> TCK
+staticconstuint8_tMTMS=14; // A1 JTAG SIGNAL -> TMS
+
+#endif/* Pins_Arduino_h */