fix not booting when compiled through ArduinoIDE

Author: me-no-dev

tools/sdk/bin/bootloader.bin

@@ -9,27 +9,23 @@
 #defineCONFIG_ESPTOOLPY_FLASHSIZE_4MB 1
 #defineCONFIG_ESPTOOLPY_FLASHFREQ "80m"
 #defineCONFIG_NEWLIB_STDOUT_ADDCR 1
-#defineCONFIG_TASK_WDT_CHECK_IDLE_TASK 1
 #defineCONFIG_ESPTOOLPY_FLASHSIZE "4MB"
-#defineCONFIG_INT_WDT 1
+#defineCONFIG_ARDUHAL_LOG_DEFAULT_LEVEL 1
 #defineCONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1
 #defineCONFIG_BT_RESERVE_DRAM 0x0
+#defineCONFIG_LOG_BOOTLOADER_LEVEL_ERROR 1
 #defineCONFIG_LWIP_MAX_SOCKETS 4
 #defineCONFIG_ESP32_DEFAULT_CPU_FREQ_160 1
-#defineCONFIG_ULP_COPROC_RESERVE_MEM32
+#defineCONFIG_ULP_COPROC_RESERVE_MEM0
 #defineCONFIG_ESPTOOLPY_BAUD 921600
-#defineCONFIG_INT_WDT_CHECK_CPU1 1
 #defineCONFIG_TOOLPREFIX "xtensa-esp32-elf-"
 #defineCONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX 0
 #defineCONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN 16384
 #defineCONFIG_ESP32_ENABLE_STACK_WIFI 1
-#defineCONFIG_TASK_WDT 1
+#defineCONFIG_LOG_DEFAULT_LEVEL_ERROR 1
 #defineCONFIG_MAIN_TASK_STACK_SIZE 4096
-#defineCONFIG_TASK_WDT_TIMEOUT_S 5
-#defineCONFIG_INT_WDT_TIMEOUT_MS 10
 #defineCONFIG_ESPTOOLPY_FLASHMODE "dio"
-#defineCONFIG_LOG_DEFAULT_LEVEL 0
-#defineCONFIG_ULP_COPROC_ENABLED 1
+#defineCONFIG_LOG_DEFAULT_LEVEL 1
 #defineCONFIG_ESPTOOLPY_FLASHMODE_DIO 1
 #defineCONFIG_PYTHON "python"
 #defineCONFIG_ESPTOOLPY_COMPRESSED 1
@@ -39,22 +35,19 @@
 #defineCONFIG_ESPTOOLPY_FLASHFREQ_80M 1
 #defineCONFIG_SYSTEM_EVENT_TASK_STACK_SIZE 2048
 #defineCONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET 0x10000
-#defineCONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 1
 #defineCONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ 160
 #defineCONFIG_FREERTOS_HZ 1000
 #defineCONFIG_FREERTOS_ASSERT_FAIL_ABORT 1
-#defineCONFIG_LOG_BOOTLOADER_LEVEL0
+#defineCONFIG_LOG_BOOTLOADER_LEVEL1
 #defineCONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
-#defineCONFIG_LOG_BOOTLOADER_LEVEL_NONE 1
 #defineCONFIG_LWIP_SO_REUSE 1
-#defineCONFIG_ESP32_DEBUG_OCDAWARE 1
-#defineCONFIG_LOG_DEFAULT_LEVEL_NONE 1
 #defineCONFIG_FREERTOS_CORETIMER_0 1
 #defineCONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv"
+#defineCONFIG_OPTIMIZATION_LEVEL_DEBUG 1
 #defineCONFIG_SYSTEM_EVENT_QUEUE_SIZE 32
 #defineCONFIG_ESPTOOLPY_BAUD_921600B 1
 #defineCONFIG_APP_OFFSET 0x10000
 #defineCONFIG_MEMMAP_SMP 1
 #defineCONFIG_ESPTOOLPY_PORT "/dev/tty.SLAB_USBtoUART"
-#defineCONFIG_OPTIMIZATION_LEVEL_RELEASE 1
 #defineCONFIG_ESP32_PANIC_PRINT_HALT 1
+#defineCONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR 1

tools/sdk/include/config/sdkconfig.h

@@ -45,8 +45,8 @@ MEMORY
 
  Start of RTC slow memory is reserved for ULP co-processor code + data, if enabled.
 */
-rtc_slow_seg(RW) : org = 0x50000000 + 32,
-len = 0x1000 - 32
+rtc_slow_seg(RW) : org = 0x50000000 + 0,
+len = 0x1000 - 0
 }
 /* Heap ends at top of dram0_0_seg */
 _heap_end = 0x40000000 - 0x0;