Quick install; requires numpy and Python OpenCV cv2 module, see getting started guide after install:

sudo pip install pyscenedetect 

Updating existing install (the last option makes sure only PySceneDetect is updated if you installed the other modules without pip):

sudo pip install pyscenedetect --upgrade --no-dependencies 

See the new USAGE.md file for details on the new detection modes, default values/thresholds to try, and how to effectively choose the optimal detection parameters. Full documentation for PySceneDetect can be found on Readthedocs at http://pyscenedetect.readthedocs.org/

PySceneDetect is a command-line tool, written in Python and using OpenCV, which analyzes a video, looking for scene changes or cuts. The output timecodes can then be used with another tool (e.g. mkvmerge, ffmpeg) to split the video into individual clips. A frame-by-frame analysis can also be generated for a video, to help with determining optimal threshold values or detecting patterns/other analysis methods for a particular video. See the USAGE.md file for details.

There are two main detection methods PySceneDetect uses: threshold (comparing each frame to a set black level, useful for detecting cuts and fades to/from black), and content (compares each frame sequentially looking for changes in content, useful for detecting fast cuts between video scenes, although slower to process). Each mode has slightly different parameters, and is described in detail below.

In general, use threshold mode if you want to detect scene boundaries using fades/cuts in/out to black. If the video uses a lot of fast cuts between content, and has no well-defined scene boundaries, you should use the content mode. Once you know what detection mode to use, you can try the parameters recommended below, or generate a statistics file (using the -s / --statsfile flag) in order to determine the correct paramters - specifically, the proper threshold value.

Note that PySceneDetect is currently in beta; see Current Features & Roadmap below for details. For help or other issues, you can contact me on my website, or we can chat in #pyscenedetect on Freenode. Feel free to submit any bugs or feature requests to the Issue Tracker here on Github.

Downloading: The latest version of PySceneDetect (v0.3.4) can be downloaded here; to run it, you will need:

• Python 2 / 3 (tested on 2.7.X, untested but should work on 3.X)
• OpenCV Python Module (usually found in Linux package repos as python-opencv, Windows users can find prebuilt binaries for Python 2.7 here)
• Numpy

More complete documentation and installation instructions can be found on Readthedocs, including a detailed guide on how to install the above dependencies.

To ensure you have all the system requirements installed, open a python interpreter/REPL, and ensure you can import numpy and import cv2 without any errors. You can download a test video and view the expected output from the resources branch (see the end of the Usage section below for details).

Installing: Once you have all the system requirements, go to where you downloaded PySceneDetect and extract the archive. To install PySceneDetect, run the following command in the folder containing the extracted files (the one containing setup.py):

python setup.py install 

After installation, you can use PySceneDetect as the scenedetect command from any terminal/command prompt. To verify the installation, run the following command to display what version of PySceneDetect you have installed:

scenedetect --version 

There is now a dedicated USAGE.md file (here) containing more detailed usage instructions. Documentation is also being added to Readthedocs, which will eventually replace the content of this file (see the PySceneDetect Quickstart Section for details)..

To run PySceneDetect, use the scenedetect command if you have it installed to your system. Otherwise, if you are running from source, you can invoke python scenedetect.py or ./scenedetect.py (instead of scenedetect in the examples shown below and elsewhere). To display the help file, detailing the command line parameters:

scenedetect --help 

To perform threshold-based analysis with the default parameters, on a video named myvideo.mp4, saving a list of scenes to myvideo_scenes.csv (they are also printed to the terminal):

scenedetect --input myvideo.mp4 --output myvideo_scenes.csv 

To perform content-based analysis, with a threshold intensity of 30:

scenedetect --input myvideo.mp4 --detector content --threshold 30 

To perform threshold-based analysis, with a threshold intensity of 16 and a match percent of 90:

scenedetect --input myvideo.mp4 --detector threshold --threshold 16 --min-percent 90 

Detailed descriptions of the above parameters, as well as their default values, can be obtained by using the --help flag.

Below is a visual example of the parameters used in threshold mode (click for full-view):

You can download the file testvideo.mp4, as well as the expected output testvideo-results.txt, from the resources branch, for testing the operation of the program. Data for the above graph was obtained by running PySceneDetect on testvideo.mp4 in statistics mode (by specifying the -s argument).

You can view the latest features and version roadmap on Readthedocs. See docs/changelog.md for a list of changes in each version, or visit the Releases page to download a specific version. Feel free to submit any bugs/issues or feature requests to the Issue Tracker.

Additional features being planned or in development can be found here (tagged as feature) in the issue tracker. You can also find additional information about PySceneDetect at http://www.bcastell.com/projects/pyscenedetect/.

Licensed under BSD 2-Clause (see the LICENSE file for details).

Copyright (C) 2012-2016 Brandon Castellano. All rights reserved.