AutoRemovePlus is a plugin for Deluge v2.x that you can use to automatically remove torrents. It's based on AutoRemove 0.1 by Jamie Lennox.

Other forks from v1 that support Deluge v2:

• https://github.com/springjools/deluge-autoremoveplus - note this one has working gtk3 ui (actually not sure)
• https://github.com/tote94/deluge-autoremoveplus - think this is only webui (actually not sure); this refers it's not springjools that has the working GTKui prefs page;

For Deluge v1 support, see deluge-1 branch

This is a GtkUI and WebUI plugin.

• Select how many torrents are allowed at the same time.
• Choose to remove or pause them based on multiple criteria age, seeders, seed time or ratio.
• Set specific removal rules depending on tracker or LabelPlus label.
• Remove only torrents from specific trackers or LabelPlus labels.
• Only remove torrents if under a certain HDD space threshold.
• Select if torrents have to fulfill both or either criteria.
• Delete torrents in order (e.g. delete torrents with highest ratio first).
• Don't remove torrents if they don't reach a minimum time (in days) or ratio.
• Choose the removal interval.
• Right click and select torrents that you don't want automatically removed.
• Remove torrent data option.
• Create an exempted tracker or LabelPlus label list, so that torrents that belong to those trackers or labels are not removed.
• Fully functional WebUI.

Look for torrents to remove every hour:

Check every: 1

Remove every torrent that meets minimum criteria:

Maximum torrents: 0

Don't remove torrents unless Deluge has over 500:

Maximum torrents: 500

Delete torrents even if HDD space not under minimum:

Minimum HDD space: -1

Only remove torrents when the main HDD has less than 10 GB free:

Minimum HDD space: 10

Remove torrents that have a ratio over 2.0 and have been seeding for at least 2 days:

Remove by: Ratio, Min: 2.0, and, Remove by: Seed Time, Min: 48

Remove torrents that have a ratio over 2.0 or have been seeding for at least 10 hours:

Remove by: Ratio, Min: 2.0, or, Remove by: Seed Time, Min: 10

Remove torrents that have a ratio over 2.2 and were added at least 4 days ago:

Remove by: Ratio, Min: 2.2, or, Remove by: Age in days, Min: 4

Remove torrents only according to first criteria:

▪️ Second Remove by: criteria

Pause torrents instead of removing them:

▪️ Remove torrents

The rest of the options are pretty self explanatory

• use python 3
• virutal env manager virtualenv
• run:

+ Install python 3.7 (or whatever your seedbox uses for python3; any py3 version should be ok) - first install pyenv: $ curl -L https://github.com/pyenv/pyenv-installer/raw/master/bin/pyenv-installer | bash - install py3: $ pyenv install 3.9.7 - cd to project root and change to version: $ pyenv local 3.9.7 - this will create .python-version file at the root - verify your py version: $ python --version + Setup virtenv; either A) manually... (not recommended): - install virtualenv: $ pip install virtualenv - create venv: $ python -m virtualenv env (note 'env' specifies the name/location to create the virtual environment in) - activate env: $ source env/bin/activate - to switch projects or just leave the venv, run: $ deactivate B) ...or using pyenv (recommended): - this step might still be needed, unsure: install virtualenv: $ pip install virtualenv - create venv: $ pyenv virtualenv venv39 (again, 'venv39' is just the name/location of the env) - switch to said env: $ pyenv local venv39 (modifies project's .python-version file) - if you have [eval "$(pyenv virtualenv-init -)"] in your .bashrc, then env activation/deactivation should be automatic; to do it manually, then pyenv activate <name> pyenv deactivate 

Either run locally from shell...

$ python setup.py bdist_egg

...or build using Docker to easily swap out Python versions:

$ make build

By default Python 3.11 is used. If you wish to target a different version specify it as an env var:

$ make build PYTHON_VERSION=3.10

Note if you're running an older version of Docker you may need to enable BuildKit manually.

The resulting AutoRemovePlus-vX.Y.Z.egg file can be found in the /dist directory. Note the .egg doesn't contain python version in the filename - our modified setup.py has logic that renames the generated .egg.

• similar to TotalTraffic plugin, start tracking upload bandwidth, but per torrent. Idea is to enable rule to only remove torrents that have uploaded less than X amount in past Y time period. So removal rule should be something like

if (ratio > 1 || seed_time > 7days) && t.recent_upload < X: t.remove TODO: how would recent_upload be defined? guess we want it to represent something like [KiB in past 1h]. Both data amount & time period need to be configurable. We likely want to keep current torrent data in-memory, and write it down periodically to `autoremoveplusstates.conf`; again, sort of similar what TotalTraffic is doing. 

This removes the impossible target ratio definition - we should just set the minimum ratio & seed time rules, and let the active torrents upload however long they can. Additional problem will be incorporating it with our UI though.

• as previously, but perhaps also allow measuring avg speed:

avg_upload_speed = torrent['total_uploaded'] / torrent['active_time'] if torrent['active_time'] > 0 else 0 OR don't count the upload speed for the time we were downloading ourselves. unsure why we shouldn't tho...: avg_upload_speed = torrent['total_uploaded'] / torrent['seeding_time'] if torrent['seeding_time'] > 0 else 0 

• need to add possibility to count seeding time from the moment torrent hits 100%; eg TL writes this in their wiki:

  Be aware that seeding time only counts for fully completed torrents (downloaded 100%).

  We might be able to use torrent attributes last_seen_complete and/or finished_time; note springjool's core.py has _time_seen_complete() that might be what we need. Thinking about it more, think finished_time attr fits our use-case better. Or maybe seeding_time? see libtorrent explanation on fields here TODO: this all is likely already covered by the existing func_seed_time we're even using in production!

• items should be removed from our state file via Execute plugin on torrent removal event; otherwise torrents removed outside of this script would not get removed from the state tracker. maybe there's some deluge's removed event we could tap into? OR: include some cleanup logic in the plugin itself to remove state info for torrents that are no longer around, ie they had to be removed by some other means.

• according to this post, torrmanager.get_status() can accept update=True param not to return cached results. this makes no sense for static fields such as name or size, but might be needed for seed_time, ratio...; apparently one of the forks of plugin has removed the caching.

• add rules/support to handle torrents such as

Name: torrent-name.mkv ID: bcbcc09416b8756384f9d72b9dd3cd0762279527 State: Downloading Down Speed: 0.0 K/s Up Speed: 0.0 K/s Seeds: 0 (0) Peers: 4 (15) Availability: 0.08 Seed Rank: - Size: 45.0 M/532.6 M Downloaded: 44.7 M Uploaded: 0 B Share Ratio: 0.00 ETA: - Seeding: - Active: 16h 20m Last Transfer: 16h 17m Complete Seen: Never Tracker: tracker.org Tracker status: Announce OK Progress: 8.45% [#####-------------------------------------------------------] Download Folder: /home/myuser/files/ Name: torrent-name-2 ID: aba61c7f8068c5b5a6414k39cec41d04477f7a4a State: Downloading Down Speed: 0.0 K/s Up Speed: 0.0 K/s Seeds: 0 (0) Peers: 0 (7) Availability: 0.00 Seed Rank: - Size: 0 B/445.1 M Downloaded: 0 B Uploaded: 0 B Share Ratio: -1.00 ETA: - Seeding: - Active: 16h 21m Last Transfer: ∞ Complete Seen: Never Tracker: tracker.org Tracker status: Announce OK Progress: 0.00% [------------------------------------------------------------] Download Folder: /home/myuser/files/incomplete 

note the Complete Seen & Availability values.

If after building the egg file, the plugin does not load in Deluge:

• Delete the AutoRemovePlus-vX.Y.Z.egg in /deluge/plugins directory.
• Delete the AutoRemovePlus.conf files.
• Restart Deluge.

• https://github.com/l3uddz/tqm - go-based torrent removal program
• https://github.com/jerrymakesjelly/autoremove-torrents
• springjools fork thread is think this one
• this post contains Execute plugin that emits 4th param - LabelPlus label - to scripts
• for deluge2 LabelPlus plugin, guess we need to grab mhertz' hack?